To Check The Program; To Modify The Program; Random Play - JVC CA-V808T Instructions Manual

3.
4.
SELECT
To stop playing, press the 7 (RETURN) button.
To delete all the tracks in a program, keep pressing the CANCEL button on the Unit until all the
tracks in the program have been deleted, or press the 0 button for each disc in the program.
To exit Program Mode, press the PROGRAM/RANDOM button twice to change to Continuous Play
mode.
To Check the Program ———————————————————————
While the Video CD Player is stopped, use the 4 (PREV) or ¢ (NEXT) buttons on the Remote
Control to check the contents of the program.
Each time you press the ¢ (NEXT) button, the program contents are shown on the display in the
programmed order. Pressing the 4 (PREV) button displays the previous step in the program.
To Modify the Program ——————————————————————
Modify the contents of a program while the Video CD Player is stopped.
Press the CANCEL button on the Unit, the last track in the program is deleted.
Each time you press the button, the last track listed in the program is deleted from the program.
To add a track to the program, follow the procedure above (on either the Unit or the Remote
Control). The news tracks are added to the end of the program.

Random Play

The tracks will play in no special order when you use this mode.
1.
PROGRAM
/ RANDOM
2.
Press the number keys (1 to 10 and +10) to select the track to program.
Example: For track 5, press 5. For track 15, press +10 then 5. For track 20, press +10 then
10. For track 32, press +10 three times, then 2.
The blinking disc number and track number changes to a steady light, and the step number is
displayed.
£ £
Press the £ £ (SELECT) button. £
The Unit plays the tracks in the order you have programmed them.
If you try to program a 33rd step, the CA-V808T lets you know that the program is full by
displaying the message "FULL" on the display.
If you try to program an disc tray that is empty, or a track number that does not exist on a disc
(for example, selecting track 14 on a disc that only has 12 tracks), the selected disc or track are
skipped when the program is played.
You can skip to a particular program step during program play. To do this from the unit, move
the MULTI CONTROL stick left or right, to do so from the Remote Control press the 4
(PREV) or ¢ (NEXT) buttons.
To play the programmed tracks over and over, press the REPEAT button. The Repeat mode
indicators light up in sequence with each press of the REPEAT button.
Press the PROGRAM/RANDOM button while the CD Player is stopped to change to the Random
Mode display.
The display changes with each press of the PROGRAM/RANDOM button, as shown below.
PROGRAM RANDOM
Press the ‹ ‹ /8 8 8 8 8 (SELECT) button (or the £ ‹ ‹ ‹
The tracks are played in random order.
When all of the tracks have been played, the Video CD Player stops.
6
PROGRAM
SOUND
MODE
VOL
1 2 3 4
5 6 7 8
9 10 11 12 RANDOM
SOUND
13 14 15 16 MODE
VOL
Off (Continuous Play)
£ £ £ £ (SELECT) button on the Remote Control).
CD
CD
(back to the beginning)
25