Ford Windstar User Manual page 22

Windstar ford
Hide thumbs Also See for Windstar:
Table of Contents

Advertisement

Instrumentation
2. Press and release the RESET
control to display "OIL LIFE XX%
HOLD RESET NEW.
3. Press and hold the RESET
control for 2 seconds to display "IF
NEW OIL HOLD RESET.
4. Release the RESET control
momentarily, then press RESET and
SETUP controls at the same time to
activate a service mode which will
display OIL LIFE XX% RESET TO
ALTER.
5. Press RESET until you find your personalized OIL LIFE XX%.
6. With your personalized OIL LIFE XX% displayed, press SETUP to
continue the system check.
DATA ERR. These messages indicate improper operation of the vehicle
network communication between electronic modules.
• Fuel Computer
• Oil life
• Charging system
• Door sensor
• Liftgate sensor
• Exterior lamps
• Traction control
• Washer fluid
• Brake Fluid
• Compass
• Outside temperature
Contact your dealer as soon as possible if these messages occur on a
regular basis.
22
%
%

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Windstar 2000Windstar 2000

Table of Contents