Table of Contents
Advertisement
1.5
Static Electricity Precaution
Static electricity can easily damage your PT-7502-2 mainboard.
Observing a few basic precautions can help you safeguard against damage that could result in
expensive repairs.
Follow the measures below to protect your equipment from static
discharge:
-
Keep the mainboard and other system components in their anti-static packaging until
you are ready to install them.
-
Touch a grounded surface before you remove any system component from its
protective anti-static packaging.
expansion slot covers at the rear of the system case or any other unpainted portion of
the system chassis.
-
During configuration and installation, touch a grounded surface frequently to discharge
any static electric charge that may build up in your body. Another option is to wear a
grounding wrist strap.
-
When handling a mainboard or an adapter card, avoid touching its components.
Handle the mainboard and adapter cards either by the edges or by the mounting
bracket that attaches to the slot opening in the case.
A grounded surface within easy reach is the
Introduction
Page
3
Hide quick links:
Advertisement
Table of Contents
