Timer Menu - Sony KLV-S40A10E Service Manual

Timer menu

Timer
Sleep Timer Off
Clock Set 20. 8. 2005 Fri 21:30
Timer
Select: Set: OK Back: End: MENU
Sleep Timer
Sets a period of time after which the TV automatically switches itself into the standby mode.
1
Press OK to select "Sleep Timer".
2
Press m/M to select the desired time period ("30min"/"60min"/"90min"/
"120min"), then press OK.
The indicator on the TV (front) lights up in amber.
Tips
• If you switch off the TV and switch it on again, "Sleep Timer" is reset to "Off."
• "Sleep timer will end soon. Power will be turned off." appears on the screen one minute before
the TV switches to the standby mode.
• If you press / , the remaining time in minutes before the TV switches to the standby mode
is displayed on the screen.
Clock Set
1
Press OK to select "Clock set".
2
Press m/M to select the day, then press ,.
3
Set the month, year, and hour in the same way as in step 2.
4
Press m/M to select the minute, then press OK. </,
The clock starts.
Timer
Sets a predefined period of time after which the TV automatically switches on/off.
1
Press OK to select "Timer".
2 Press m/M to select "Set", then press OK.
3
Press , to select the desired period ("One Day", "Daily", "Mon-Fri" or
"Weekly"), then press OK.
4
Press m/M to select "On Time" or "Off Time", then press OK.
5
Press m/M to active. Press ,, then press m/M/</, to set time you
wish to switch on/off the TV. Press OK to confirm.
You can select the options listed below on the Timer
menu. To select options, see "Navigating through
menus" (page 19).
Set Up menu
Set Up
Auto Start Up
Language
English
Country -
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Digital Set Up
Select: Set: OK Back: End: MENU
Auto Start Up
Starts the "first time operation menu" to select the language and country/region, and tune in
all available digital and analogue channels. Usually, you do not need to do this operation
because the language and country/region will have been selected and channels already tuned
when the TV was first installed (page 13). However, this option allows you to repeat the
process (e.g., to retune the TV after moving house).
1
Press OK to select "Auto Start Up".
2
Press OK to select "Yes."
The Language menu appears on the screen.
3
Follow steps of "6: Selecting the language and country/region" (page 12)
and "7: Auto-tuning the TV" (page 13).
Language
Selects the language in which the menus are displayed.
1
Press OK to select "Language".
2
Press M/m/</, to select the language, then press OK.
All menus will appear in the selected language.
Country
Selects the country/region where you operate the TV.
1
Press OK to select "Country".
2
Press M/m to select the country/region in which you will operate the TV,
then press OK.
You can select the options listed below on the Set Up
menu. To select options, see "Navigating through
menus" (page 19).