Bosch Classixx 1200 Instruction Manual page 45

Electrical
connection
Caution
The washing machine must only be connected to
alternating current and using a properly installed
socket outlet with earthing contact.
The mains voltage must correspond to the voltage
specification on the washing machine (nameplate).
Connection specifications as well as the required
fuses are stipulated on the appliance nameplate.
Make sure that:
q the mains plug fits the socket outlet.
q the cable cross section is permissible.
q the earthing system is properly installed.
The mains cable may be replaced by an electrician
only.
Replacement mains cable available from customer
service.
Do not use multiple plugs / connectors or extension
cables.
In the event that an earth leakage circuit breaker is
to be used, only use types marked with the following
symbol: 7. Only this symbol can guarantee
compliance with all current regulations.
Do not insert / remove the mains plug with wet or
damp hands.
Handle the plug body only when removing the plug
from the socket.
45