Advertisement
Quick Links
Advertisement
Related Manuals for Beamz MHL-363
Summary of Contents for Beamz MHL-363
- Page 1 Ref. No.: 150.525 MHL-363 SPOT 36X3W RGBW 16CH DMX MANUAL...
- Page 2 Safety Instruction Please read the instructions carefully, which includes important information about the installation, usage and maintenance WARNING Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet ...
- Page 3 Technical Specification Extremely small, fast and powerful LED Moving beam. DMX Channels:9/12/16CH Pan/Tilt:630 /240 speed adjustable Smooth electronic dimming:0-100% Electronic strobe with pulse and random effects High efficiency, low power consumption Super compact, low weight Weight: 5.7kg Voltage:...
- Page 4 How To Set The Unit Control Pan Display To show w the various menus and the selected d functions MX input Pres sent MASTER aster Mode SLAVE ave Mode SOUND Flashing und activatio Button MENU To select th he programm ming functions DOWN To go backw...
- Page 5 Main Function To select any of the given functions, Press the MENU button up to when the required one is showing on the display. Select the function by ENTER button and the display will blink. Use DOWN and UP button to change the mode. Once the required mode has been selected, press the ENTER button to setup, to go back to the functions without any change press the MENU button again.
- Page 6 DMX Address Select DMX Address, Press the ENTER button to confirm, the present address will blink on the display. Use the UP and DOWN button to adjust the address from 1 to 512.Once the address has been selected, press the ENTER button to setup, to go back to the functions without any change press the MENU button again.
- Page 7 Back Light Select Back Light, Press the ENTER button to confirm, present mode will blink on the display. Use the DOWN and UP button to select the On(LED On) or Off((LED Off)mode. Once the mode has been selected, press the ENTER button to setup, to go back to the functions without any change press the MENU button again.
- Page 8 AUTO Defaults: Mostly automatic mode, for non-professional users, detailed explanation as followings: Slave Mode -->Slave 1 Black Out -->No Sound State -->On Pan Inverse -->No Tilt Inverse -->No Back Light -->On (Notice: Other settings are NOT changed while choosing Defaults Setting!) Press the ENTER and the corresponding functions will set to defaults setting, to go back to the functions without any change press the MENU button again.
- Page 9 DMX Controller By using a universal DMX Controller to control the units, you will need to set DMX address from 1 to 512 so that the units can receive DMX signal Press the MENU button up to when the DMX Address is showing on the display. Pressing ENTER button and the display will blink.
-
Page 10: Specification
DMX 512 Connection 1. If you using a controller with 5 pins DMX output, you need to use a 5 to 3 pin adapter-cable 2. At last unit, the DMX cable has to be terminated with a terminator. Solder a 120 ohm 1/4W resistor between pin 2(DMX-)and pin 3(DMX+)into a 3-pin XLR-plug and plug it in the DMX-output of the last unit 3. -
Page 11: Ce Declaration Of Conformity
0031546589298 The Netherlands Product number: 150.525 Product Description: Beamz Professional, MHL-363 Spot 36x3W RGBW 16ch Regulatory Requirement: EN 60598-1 EN 60598-2-17 EN 61000-3-2/-3-3 EN 55015 EN 61547 The product meets the requirements stated in the above mentioned Declaration(s). - Page 12 Specifications and design are subject to change without prior notice.. www.tronios.com Copyright © 2013 by TRONIOS the Netherlands ...
Need help?
Do you have a question about the MHL-363 and is the answer not in the manual?
Questions and answers