Philips LC4.9U AA Service Manual page 12

EN 12 4. LC4.9U AA
4.3.10 Plasma Display Panel / Glass Plate
1. Remove the T20 display panel mounting screws [1].
2. Remove the T10 screws [2] from the mounting frame.
3. Unplug all cable(s):
– LVDS cable at SSB side (fragile connector!).
– SSB supply cables at the Main Supply board.
– Mains cable at the Main Supply board.
– Side I/O cable at SSB side (fragile connector!).
Mechanical Instructions
2
1
2
Figure 4-15 Display panel removal
Figure 4-16 Frame lift
– Cable at LED panel.
– Keyboard cable at SSB side.
– Audio Amplifier supply cable at the Main Supply board.
– Loudspeaker cables (incl. ferrites) at the Audio panel.
4. Lift the metal frame (together with all PWBs) from the
display panel (see figure "Frame lift").
5. After removal of the frame, lift the PDP from the set.
2
1
2
F_15400_121.eps
200505
F_15400_120.eps
200505