Listening To The Radio - JVC CA-DXT7 Instructions Manual

Listening to the Radio

To select the AM tuner interval spacing
Some countries space AM stations 9 kHz apart, and other
countries use 10 kHz spacing.
1
Select "AM," then turn off (stand by) the System.
FM
2
Select the AM tuner interval spacing.
To select 9 kHz:
(holding then...)
To select 10 kHz:
(holding then...)
To select the band (FM/AM)
FM/AM
FM
To tune in to a station
While FM or AM is selected...
1
sec.
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency search stops.
• When you repeatedly press the button, the frequency
changes step by step.
To stop searching manually, press either button.
10
INFO
Main Unit
ONLY
AM
AM
Increases the frequencies.
Decreases the frequencies.
If the received FM station is hard to listen
The MONO indicator lights on the
FM MODE
display. Reception will improve though
stereo effect is lost—monaural reception
mode.
To restore the stereo effect, press the
button again (the MONO indicator goes
off).
Remote
ONLY
To preset stations
You can preset 30 FM and 15 AM stations.
• To cancel the operation during procedure, press CANCEL.
1
Tune in to a station you want to preset.
• You can also store the monaural reception mode for FM
preset stations if selected.
2
Start presetting.
SET
3
Select a preset number.
Examples:
1 2 3
To select preset number 5, press 5.
4 5 6
To select preset number 15, press +10,
then 5.
7 8 9
To select preset number 30, press +10,
10 0 +10
+10, then 10.
• You can also use +/– buttons.
4
Store the station.
SET
To tune in to a preset station
1
Select the band (FM or AM).
FM/AM
FM
Remote
ONLY
AM