Section 2. System Installation And Wiring; Installing The System; Install The Control Cabinet - ADEMCO 4110XM Installation Instructions Manual

SYSTEM INSTALLATION AND WIRING
–––––––––––––––––––––––––
Refer to the Summary of Connections diagram on the inside back cover of this manual for terminal
connections when following these procedures.

1. Install the Control Cabinet

• Mount the cabinet.
• Install the cabinet lock as follows:
• Mount the PC board either alone, or with the wireless receiver in the same cabinet (see
Figures 2 and 3 to follow).
A
DETAIL SIDE VIEW OF CLIP INSTALLATION
A-CABINET TAB WITHOUT CLIP
B-CABINET TAB WITH HANGING CLIP
Section 2.
INSTALLING THE SYSTEM –––––––––––––––––
LOCKED
RETAINER
CLIP
UNLOCKED
CABINET DOOR BOTTOM
Figure 1. Installing The Cabinet Lock
B
3RD CLIP
REQUIRED
Figure 2. Mounting The PC Board Alone
-7-
RETAINER CLIP
(NOTE POSITION)
RETAINER
SLOTS
DETAIL SIDE VIEW OF CLIP AND
BOARD INSTALLED
DETAIL SIDE
VIEW OF BOARD
INSERTED INTO
SLOTS