Speco D4VS User Manual page 42

ADMIN, USER1, USER2, USER3:
Selected Checkbox: The user can access the function.
Blank Checkbox: The user can not access the function.
USER NAME Change the name of USER1, USER2 and USER3.
SETUP Click "ENTER" after naming.
Options are ADMIN, USER1, USER2 and USER3.
PASSWORD
Select USER PASSWORD using the mouse or the remote control and press SEL
SETUP
button. Select user type and enter the current password. And, enter a new password,
enter the same password again to confirm and select OK. Then the message
"PASSWORD CHANGED" is displayed.
The factory default password is 1111.
It is highly recommended to assign a new password to protect the system.
AUTHORITY Set authority level of playback on each user.
OF PLAYBACK Checked box: authorized to playback. Blank check box: no authority.
42