Panasonic DP-1510P Service Manual page 259

5.1.4. F5 Mode: Copier Function Parameters
Set the machine to Service Mode and press "5" on the Keypad.
↓
Press the "START" key.
↓
Select the desired code number on the Control Panel.
↓
If you wish to select another code number, scroll the menu with the arrow keys (↑ ↓).
↓
Select the desired function on the Control Panel and press the "START" key.
↓
When the "CLEAR" key is pressed, the selected setting inputted will not be accepted.
↓
Press the "FUNCTION" and "CLEAR" keys simultaneously to exit the Service Mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
Note:
If you change the Function Parameter "F5 - 00", Country version, you must also change the related
Function Parameters "F5 - 80, 95, 96".
No.
00 Country Version
(See Note)
01-02 Not Used
03 LSU Startup Speed
04 LSU Off Timer
05-08 Not Used
09 Fuser Lamp Phase Control
10 Not Used
11 Copy Reservation
12-13 Not Used
Edition 2.0
Item
0 : Japanese
1 : North American
2 : European
3 : Other
0 : Low
1 : Stop
0 : 15 sec
1 : 30 sec
2 : 45 sec
3 : 60 sec
4 : 75 sec
0 : Zero cross control (No)
1 : Phase control (Pattern 1)
2 : Phase control (Pattern 2)
0 : No
1 : Yes
F5 Mode
Function
259
DP-1510P/1810P
/1810F/2010E
Factory Setting
1 (for North
America)
2 (for Europe/
Other)
0
1
0 (for North
America)
2 (for Europe/
Other)
1
APR 2002