Medisana MediTouch Instruction Manual page 29

3. When the blood drop symbol
flashes in the display, take a drop
of blood from your finger tip
(as described in section 5.2.2,
point 7., page 18).
4. Massage the area gently to
stimulate the blood circulation.
5. Place the drop onto the blood
sample area on the end of the test
strip.
6. Do not get any blood on the top
of the test strip.
5 Operating
7. When a sufficient amount of
blood has been absorbed by the
reaction cell on the test strip you
will hear a beep. After approx.
5 seconds the result appears in
the display.
25