Medisana MediTouch Instruction Manual page 24

5 Operating
4. Replace the cap on the lancing
device and tighten by turning it
in an anti-clockwise direction
(not too tight).
20
Markings for lancing depths
5. Set the appropriate lancing depth,
as described on p.18.
6. Set the lancing device by
extending it until it clicks into
place.
If it does not click, it is probably
already in position from when you
inserted the lancet.
The lancing device is ready to use.
Do not lance your finger before
the monitor and test strips are
ready to use.