Vfp (Video Fine Processor) - JVC 0305MWMMDWBET Instructions Manual

Changing the Picture Tone—VFP (Video
Remote
Fine Processor)
ONLY
While showing a playback picture on the TV screen, you can
select the preset picture tone, or adjust it and store your own
likeliness.
To select a preset picture tone
1
Activate VFP.
2
Select a preset picture tone.
NORMAL Normally select this.
CINEMA Suitable for a movie source.
USER1/USER2
You can adjust parameters and can store
the settings (see the right column).
NORMAL
0
GAMMA
0
BRIGHTNESS
CONTRAST 0
0
SATURATION
0
TINT
0
SHARPNESS
On the TV screen
NORMAL CINEMA
USER2 USER1
To adjust the picture tone
1
Select "USER1" or "USER2."
• Follow steps 1 and 2 explained on the left column.
2
Select a parameter you want to adjust.
GAMMA Adjust if the neutral color is bright or
dark (–3 to +3).
BRIGHTNESS Adjust if the entire picture is bright or
dark (–8 to +8).
CONTRAST Adjust if the far and near positions
are unnatural (–7 to +7).
SATURATION
Adjust if the picture is whitish or
blackish (–7 to +7).
TINT
Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS
Adjust if the picture is indistinct
(–8 to +8).
3
Adjust the parameter.
4
Repeat steps 2 to 3 to adjust other parameters.
To erase the screen, press VFP again.
17