Yamaha HTR-5750 Owner's Manual page 35

• Downmixing to 2 channels
You can enjoy 2-channel stereo playback even frtnn multi-
channel sources.
Press PROGRAM <I> repeatedly (or press
STEREO on the remote control) to select 2ch
Stereo.
5,€.0 1ALL IA%) MY,
W
PROCIRAM I
)11EnTAIN „ niTn
M VI
,
Or
0
o
\
JUDTS NIGHT ea es Roxif.n
Front panel
e
CP
Remote control
ii
C
111 SC Libwoofer
with this proeram when SWER or
LBIIH is selected in "BASS Mt f.
• Listening to unprocessed input signals
In STRAIGHT mode, two channel stereo sources are
output from only the front left and right speakers. Multi-
channel sources are decoded straight into the appropriate
channels without any additional effect processing.
Press STRAIGHT (EFFECT) to select STRAIGHT,
STRAiGhT
STRAIGHT
BMA
Or
EFFEC
Front panel
Remote control
cc TR P
1,7;
H T
l'ress SI RAIGHT (EFFECT) again so that "STRAIGHT -
disappears from the display when you want to turn the
sound effect hack on.
• Virtual CINEMA DSP
Virtual CINEMA DSP allows you to enjoy the CINEMA
OSP programs without surround speakers. It creates
virtual speakers to reproduce the natural sound field.
If you set "St:RR 1.12 - to NONE (see page 46 h Virtual
CINEMA DSP activates automatically whenever you
select a CINEMA DSP sound field program.
Note
Virtual CINEMA DSP will not activate egen when '•SURE
Is sin to NONI: (see page 461 in the °Bowing cases:
Whi2n \ LITI
CH INPUT is selected as the input source.
-55 hen headphones arc connected to the PlIONES jack.
Selecting input modes
This unit collies with a variety of input Jacks. Do the
MIlowing to select the type of input signals you want to
use.
1 Rotate INPUT to select the input source.
2
Press INPUT MODE to select an input mode.
In most cases,
use AUTO.
vor En., mocon ,uNFR c,
r"! !
[- . 1
T
: .
i
Input source Input mode
AUTO
Automatically selects input signals
in
the following order:
I Digital signals*
2t Analog signals
DTS
Selects only digital signals encoded in
DTS.
if
no DTS signals ale input.
no
sound is output.
PIIIRLIDG
Selects only analog signals. If no
analog signals are input, no sound is
output.
naps
Lail( lICLCCIS LI
Dolby Digital or IXIS signal. the
decoder automatically switches to the appropriate sound
field program.
You can itchier the default input mode this unit selects when [lie
power is turned on I see page 494
31