Pwron After Pwr-Fail - Medion MD 9901 User Manual

PWRON After PWR-Fail

ON (Power will be ON)
OFF (Power will be OFF)
Former-Sts (Power will depend on last state)
channels 3 or 1. The onboard parallel
port is EPP Spec. compliant, so after the
user chooses the onboard parallel port
with the EPP function, the following
message will be displayed on the
screen: "EPP Mode Select." At this
time either EPP 1.7 spec. or EPP 1.9 spec.
can be chosen.
The settings are power on , power off or
former status. During ON, after
every AC power loss, the system will be
turned on. During Former Status, after
every AC power loss, whatever the
system status, it will be the same when
the AC power returns. During OFF, after
every AC power loss, the system will be
shutdown.
3-33
®