Setting Up; Id Settings; Set The Projector Id; Checking The Projector Id - Epson EB-G6750WU Installation Manual

Setting Up

ID Settings

When an ID is set for the projector and the remote control, you can use
the remote control to operate only the projector with a matching ID. This
is very useful when managing multiple projectors.
a
• Operation using the remote control is possible only for projectors
that are within the operating range of the remote control.
p.10
s
• When Remote Control Type is set to Simple from Operation in the
configuration menu, you cannot set the remote control ID.
• IDs are ignored when the projector ID is set to Off or the remote
control ID is set to 0.

Set the projector ID

Press [Menu] button > Extended > Multi-Projection > Projector ID
Select the ID you want to set, and then press the [

Checking the Projector ID

During projection, press the [Help] button while holding the [ID] button.
When you press the buttons, the current Projector ID is displayed on the
projection screen. It disappears in about three seconds.

Setting the remote control ID

] button.
a
Remote control
Set the remote control [ID] switch to On.
28