Menu Operating Procedure - JVC RX-D701S Instructions Manual

Menu operating procedure

When operating, the on-screen display appears on the TV screen regardless of the SUPERIMPOSE setting (see page 32).
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
In this section, the operation of the remote control is used for explaining.
Ex.: When adjusting subwoofer output level.
Operations
1
To start the adjustment, press
ADJUST.
The setting item previously selected can be shown
on the TV screen by pressing ADJUST on the front
panel when the receiver is in normal operation
mode.
2
To select the desired submenu, press
5 or ∞ repeatedly.
There are four screens from "ADJUST MENU (1)" to
"ADJUST MENU (4)." To change the screen, simply
pressing 5 or ∞ repeatedly. You can go to the next/
previous screen.
• On the front panel, turn MULTI JOG.
3
Press SET.
4
To select the appropriate setting, press
2 or 3 repeatedly, then press SET.
The on-screen display returns to the previous
ADJUST MENU. In this example, "ADJUST MENU
(1)" appears on the TV screen and "SUBWFR LVL"
appears on the display.
• On the front panel, turn MULTI JOG, then press
SET.
5
Repeat steps 2 to 4 to set other items
if necessary.
NOTE
To exit from menu operations, press EXIT on the remote control. On the front panel, press ADJUST.
On the TV screen
ADJUST MENU (1)
5
SUBWOOFER LEVEL :
FRONT L LEVEL :
FRONT R LEVEL :
CENTER LEVEL :
SURR L LEVEL :
SURR R LEVEL :
S BACK L LEVEL :
S BACK R LEVEL :
∞
:ENTER :EXIT
The setting item previously selected
appears.
SUBWOOFER LEVEL
SUBWOOFER LEVEL :2
23:OPERATE
:BACK
The selected submenu appears.
SUBWOOFER LEVEL
SUBWOOFER LEVEL :2
–10
On the display
O P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP
x
0
The submenu previously
0
selected appears.
0
0
0
0
0
0
O P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP
x
03
The current setting of the
selected item appears.
O P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP
x
03
0 +10
AUTO MODE
ATT
HP
MHz
kHz
AUTO MODE
AUTO MODE
35