1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Camcorder
  5. VPC-HD800GXBK
  6. Service manual

Sanyo VPC-HD800GXBK Service Manual

Digital movie camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
Digital Movie Camera
Contents
1. OUTLINE OF CIRCUIT DESCRIPTION ............................... 3
2. DISASSEMBLY ................................................................... 12
3. ELECTRICAL ADJUSTMENT ............................................. 17
5. TROUBLESHOOTING GUIDE ............................................ 22
6. PARTS LIST ........................................................................ 24
RoHS
•This product does not contain any hazardous substances prohibited by the RoHS
Directive.
WARNING
•You are requested to use RoHS compliant parts for maintenance or repair.
•You are requested to use lead-free solder.
(This product has been manufactured using lead-free solder. Be sure to follow the
warning given on page 2 when carrying out repair work.)
CAUTION : Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer.
Discard used batteries according to the manufacturer's instructions.
NOTE : 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
Design and specification are subject to change without notice.
SG218/GX, GX2, GX3 (R)
FILE NO.
VPC-HD800GXBK
(Product Code : 168 162 04)
(South America) (China)
(Australia) (Hong Kong)
(General) (Korea) (Taiwan)
VPC-HD800GX
(Product Code : 168 162 08)
(South America) (China)
(Australia) (Hong Kong)
(General) (Korea) (Taiwan)
VPC-HD800GXP
(Product Code : 168 162 12)
(South America) (China)
(Australia) (Hong Kong)
(General) (Korea) (Taiwan)
REFERENCE No. SM5310757

Advertisement

Table of Contents
loading

Related Manuals for Sanyo VPC-HD800GXBK

Summary of Contents for Sanyo VPC-HD800GXBK

  • Page 1: Table Of Contents

    FILE NO. SERVICE MANUAL Digital Movie Camera VPC-HD800GXBK (Product Code : 168 162 04) (South America) (China) (Australia) (Hong Kong) (General) (Korea) (Taiwan) VPC-HD800GX (Product Code : 168 162 08) (South America) (China) (Australia) (Hong Kong) (General) (Korea) (Taiwan) VPC-HD800GXP...
  • Page 2 WARNING Do not use solder containing lead. Note: This product has been manufactured using lead-free solder in If replacing existing solder containing lead with lead-free sol- order to help preserve the environment. der in the soldered parts of products that have been manufac- Because of this, be sure to use lead-free solder when carrying tured up until now, remove all of the existing solder at those out repair work, and never use solder containing lead.

  • Page 3: Outline Of Circuit Description

    1. OUTLINE OF CIRCUIT DESCRIPTION 1-1. CMOS CIRCUIT DESCRIPTION 1. IC Configuration The CMOS peripheral circuit block basically consists of the following ICs. IC911 (MT9N001I12STC) CMOS imager CDS, AGC, ADC built-in H driver, V driver, serial communication circuit built-in 2. IC911 (CMOS) [Structure] The electric charges which are generated when each pixel is optically converted are in turn converted into signal voltages...
  • Page 4 1-2. CP1 and VF1 CIRCUIT DESCRIPTION 1. Circuit Description 2. Outline of Operation 1-1. Signal processor When the shutter opens, the reset signals (ASIC and CPU) 1. γ correction circuit and the serial signals (“take a picture” commands) from the 8- This circuit performs (gamma) correction in order to maintain bit microprocessor are input and operation starts.
  • Page 5 4. Lens drive block 5. Video Clip Recording and Playback 4-1. Focus drive 5-1. Recording The 16-bit serial data signals (LENS_SD) and (LENS_SCLK The signal from the camera block is input to IC101 (ASIC). The and LENS_EN) which are output from the ASIC (IC101) are data that is input to the ASIC is input to SDRAM, and converts used to drive (FOCUS A +, FOCUS A -, FOCUS B + and FO- this data to encoded MPEG4 data, after which it is written in...
  • Page 6 1-3. PWA POWER CIRCUIT DESCRIPTION 1. Outline 3. Motor System Power Output This is the main power circuit, and is comprised of the follow- BOOST 5.3 V is output. Feedback for the 5.3 V output is pro- ing blocks. vided to the switching controller (Pin (B7) of IC501) so that Switching controller (IC501) PWM control can be carried out.
  • Page 7 1-4. ST1 STROBE CIRCUIT DESCRIPTION 1. Charging Circuit 2. Light Emission Circuit When UNREG power is supplied to the charge circuit and the When FLCLT signal is input from the ASIC, the stroboscope CHG signal from microprocessor becomes High (3.3 V), the emits light.
  • Page 8 1-5. SYA CIRCUIT DESCRIPTION 1. Configuration and Functions For the overall configuration of the SYA block, refer to the block diagram. The SYA block centers around a 8-bit microprocessor (IC301), and controls camera system condition (mode). The 8-bit microprocessor handles the following functions. 1.
  • Page 9 BAT_T Battery temperature detection COMREQ COMREQ input Battery OFF detection signal input BAT_OFF Serial communication request signal SREQ KEY_1st S1 key input IR_IN Remote control signal input #RESET Reset input power monitoring XCIN Clock (32.768 kHz) XCOUT Clock (32.768 kHz) VSS1 Power Clock (4MHz)
  • Page 10 4. Power Supply Control The 8-bit microprocessor controls the power supply for the overall system. The following is a description of how the power supply is turned on and off. When the battery is attached, a regulated 3.2 V voltage is normally input to the 8-bit microprocessor (IC301) by IC302, so that clock counting and key scanning is carried out even when the power switch is turned off, so that the camera can start up again.
  • Page 11 MEMO – 11 –...

  • Page 12: Disassembly

    2. DISASSEMBLY 2-1. REMOVAL OF TB2 BOARD, ST1 BOARD, LENS AND CP1 BOARD When assembling, tighten the screws order. a → b 46 42 When assembling, tighten the screws order. a → b → c → d 3, 19 When assembling, tighten the screws order.
  • Page 13 1. Two screws 1.7 x 3 45. Cord, terminal BK CA2 2. Two screws 1.7 x 3 46. Two screws 1.7 x 3 3. Open the cover jack. 47. Heat sink A 4. Screw 1.7 x 4 48. Heat sink B 5.
  • Page 14 2-2. REMOVAL OF CABINET RIGHT 1. Two screws 1.7 x 3.5 8. Spacer lens right 2. Assy, lamp 9. Two screws 1.7 x 2.5 3. Screw 1.7 x 3.5 10. Holder joint 4. Unit control 11. Screw 1.7 x 3.5 5.
  • Page 15 2-3. REMOVAL OF LCD, VF1 BOARD AND TB1 BOARD When assembling, tighten the screws order. a → b When assembling, tighten the screws order. A → B → C → D → E 1. Screw 1.7 x 2 17. Remove the solder. 2.
  • Page 16 2-4. BOARD LOCATION VF1 board CA1 board ST1 board TB1 board CP1 board TB2 board – 16 –...

  • Page 17: Electrical Adjustment

    3. Pattern box (color viewer) from the following URL. Turn on the switch and wait for 30 minutes for aging to take http://www.digital-sanyo.com/overseas/service/ place before using Color Pure. It is used after adjusting the Place the DscCalDi.exe file, camapi32.dll file and chroma meter (VJ8-0192) adjust color temperature to 3100 ±...
  • Page 18 3-6. The adjustment item which in necessary in part exchange CMOS Black CMOS White Point And White USB storage Factory Lens Language Reset Point Defect Point Defect information Cord Setting Adjustment Setting Adjustment Detect Detect Adjust- registration Setting Adjustment ment In Lighted COMPL PWB CP-1 COMPL PWB ST-1 COMPL PWB VF-1...
  • Page 19 Adjustment value determination is effectuated using the Adjustment value determination “CHECK", “CHECK_ND”, "MS", “MS_M” and “IRIS” values. 1800<=STD_AFPOS<=2000 If CHECK= wc0, wc1, wc2, CHECK_ND= wnc0, wnc1, wnc2, -100<=focus1<=+100, -100<focus2<+100, MS= ms1, ms2, MS_M= ms3, ms4 and IRIS= s1, s2, s3, s4, -100<=focus3<=+100, -200<=focus4<=+200 s5, the adjustment values fulfill the conditions below, they are lens_error=0, 0<=g<=255, 0<=o<=255...
  • Page 20 3-13. Firmware uploading procedure 3-9. Factory Code Setting 1. Uploading the firmware should be carried out if the version 1. Check the "Factory Code" display within the Setting group. number (COMPL PWB XX-X) on the replacement circuit 2. For U.S.A., Canada and NTSC general area board is lower than the version of the distributed firmware.

  • Page 21: Usb Storage Information Registration

    17.) 2. Double-click on the DscCalDi.exe. 3. Click on the Get button in the USB storage window and check the USB storage data. VID: SANYO PID: HD800 Serial: Rev. : 1.00 4.

  • Page 22: Troubleshooting Guide

    5. TROUBLESHOOTING GUIDE POWER LOSS INOPERTIVE TAKING INOPERATIVE PUSH SHUTTER PUSH THE POWER BUTTON SW FOR A WHILE IC301-54, 24 IC301-44 CHECK S3003 (KEY_1st, KEY_2nd) CHECK SW UNIT (SCAN OUT3) LEVEL INPUT PULSE INPUT IC501-D6, F6 (PON) CHECK IC301, IC101, IC302-7 5.3 V IC503-4 (PON2) CHECK IC501...
  • Page 23 MEMO – 23 –...

  • Page 24: Parts List

    6. PARTS LIST LOCATION PARTS NO. DESCRIPTION ACCESSORIES & PACKING MATERIALS 636 116 9875 CASE SOFT-SG218/J 636 104 5841 STRAP -SG114/J 636 117 1328 DISC,DVD XSD G218 U, Xacti Software DVD 1.4 (N.S.P), English,German,French,Spanish,Dutch,Italian, Russian,Portuguese,Chinese (Simplified), Chinese (Traditional),Korean 645 098 4150 BATTERY,RECHARGE,LI-ION 645 080 4441 CABLE,DSC USB,SX812...
  • Page 25 SG218/GX_ACC...
  • Page 26 636 106 7935 COVER CARD-SG212/J 636 109 3026 SPACER UNIT FPC-SG212/J 636 117 0130 HOLDER TOP-SG218/J 636 117 0376 CABINET LEFT-SG218/J,VPC-HD800GXBK ONLY 636 117 0383 CABINET LEFT-SG218/J2,VPC-HD800GX ONLY 636 117 0390 CABINET LEFT-SG218/J3,VPC-HD800GXP ONLY 636 106 7881 CABINET TOP-SG212/J 636 116 1268...
  • Page 27 Cabinet 1 SG218/J PARTS LIST 1...
  • Page 28 LOCATION PARTS NO. DESCRIPTION CABINET & CHASSIS PARTS 2 636 109 4290 ASSY,CABI R-SG212,VPC-HD800GXBK ONLY 636 117 1014 ASSY,CABI R-SG212,EXCEPT VPC-HD800GXBK 636 106 7898 BUTTON POWER-SG212/J 636 106 8123 HEAT SINK-SG212/J 636 106 8055 HOLDER JOINT-SG212/J 636 109 2982 SPACER HL JOINT-SG212/J...
  • Page 29 Cabinet 2 SG218/J PARTS LIST 2...
  • Page 30 ELECTRICAL PARTS Note: 1. Materials of Capacitors and Resistors are abbreviated as follows ; Resistors Capacitors MT-FILM Metallized Film Resistor MT-POLYEST Metallized Polyester Capacitor MT-GLAZE Metallized Glaze Resistor MT-COMPO Metallized Composite Capacitor OXIDE-MT Oxide Metallized Film Resistor TA-SOLID Tantalum Solid Capacitor AL-SOLID Aluminum Solid Capacitor NP-ELECT...
  • Page 31 LOCATION PARTS NO. LOCATION PARTS NO. DESCRIPTION DESCRIPTION LOCATION PARTS NO. LOCATION PARTS NO. DESCRIPTION DESCRIPTION D5004 307 205 5206 DIODE RB521S-30 C1066 303 338 0309 CERAMIC 0.1U K 10V D5005 307 250 0706 DIODE DRB060M-30 C1067 303 338 0309 CERAMIC 0.1U K 10V D5006...
  • Page 32 LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION C5073 303 276 1000 CERAMIC 0.01U K 16V R1002 301 237 2905 MT-GLAZE 51 JA 1/16W C5074 303 376 9401 CERAMIC 1U K 6.3V R1004 301 224 9009 MT-GLAZE 10K JA 1/16W C5101 303 393 2607 CERAMIC...
  • Page 33 LOCATION PARTS NO. LOCATION PARTS NO. DESCRIPTION DESCRIPTION LOCATION PARTS NO. DESCRIPTION R5001 301 262 8705 MT-GLAZE 910 DC 1/16W R9710 301 246 2101 MT-GLAZE 51K JA 1/16W R5002 301 226 1506 MT-GLAZE 0.000 ZA 1/16W R9712 301 261 1509 MT-GLAZE 4.3K JA 1/16W R5021 301 258 7101...
  • Page 34 LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION C1712 303 433 1102 CERAMIC 1U K 10V R5422 302 106 1708 MT-GLAZE 220K JD 1/8W C1713 303 433 1102 CERAMIC 1U K 10V R5424 301 224 9009 MT-GLAZE 10K JA 1/16W C1714 303 433 1102 CERAMIC...

  • Page 35: Circuit Diagrams & Printed Wiring Boards

    CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS TABLE OF CONTENTS OVERALL WIRING & BLOCK DIAGRAMS Page OVERALL WIRING ............................C3 OVERALL CIRCUIT ............................C4 POWER CIRCUIT ............................. C4 IMAGE SENSOR CIRCUIT ..........................C5 LENS CIRCUIT ..............................C5 MAIN CIRCUIT ..............................C6 SYSTEM CONTROL CIRCUIT ........................
  • Page 36 NOTES: 1. All resistance values in "OHMS" unless otherwise noted. (K=1,000 ; M=1,000,000) µ 2. All capacitance values in " F" unless otherwise noted. µ p=pico farad ; ,u or U=micro farad µ 3. All inductance values in " H" unless otherwise noted. µ...

  • Page 37: Overall Wiring & Block Diagrams

    OVERALL WIRING & BLOCK DIAGRAMS OVERALL WIRING JW181 MIC(L) MIC_L A_GND JW182 JW183 MIC(R) MIC_R A_GND JW184 JW101 JW102 JW171 JW651 HINJ1 SW1 SI2C SPEAKER JW652 HINJ1 SW2 BLACK JW172 CN951 ZOOM A+ ZOOM B+ CN141 ZOOM A- DATA3 ZOOM B- COMMAND ZOOM LED ZOOM VCC...

  • Page 38: Overall Circuit

    OVERALL CIRCUIT POWER CIRCUIT POWER_IN (TO DMA) IC521 LENS UNIT CHG_CNT FLASH JK501 LTC4061EDD TRIGGER (DC JACK) REFLECTOR TO SYA TRANS CHRG BATTERY BATCHGERR BATTERY CHARGE CA1 BOARD (ST1) CN141 CN951 CP1 BOARD ST1 BOARD JW541:544 L5002 B1, B2, C1, C2 IC971 IC951 IC911...

  • Page 39: Image Sensor Circuit

    IMAGE SENSOR CIRCUIT LENS CIRCUIT IC951 CN951 BU2233GU VDD_1.8 VDDIO VDDPLL VAA_2.8 VAAPIX_A VAAPIX_B LENS_BLOCK IC101 LENS DRIVER ZOOM VCC EV2MB VDD3 J4, J8, B7 SYSTEM ASIC BOOST5.3V MVCC12, MVCC34, MVCC56 ZOOM_PI VDD3 DVDD VDDIO VDDPLL VAAPIX VAAPIX Z_SENSE ZPIOUT (IC101 H2pin) FOCUS VCC VDD3...

  • Page 40: Main Circuit

    MAIN CIRCUIT 48MHz CMOS1.8,VAA2.8 IC111 CCDDO[2:13] AK8113L I2CSCLK,I2CSDATA 74.17582MHz AF25, AJ24 CLOCK GENERATOR RESET_BAR PIXCLK (DMA) CN901 AK27 BOARD B TO B EXTCLK AK20 X1102 LINE_VALID,FRAME_VALID 48.000MHz AK6, AB5 AK19 SHUTTER (DMA) (CAA) PWA BLOCK PAON1,PAON2 E1,G5 POWER SUPPLY SHUTTER+,NDON,NDOFF J4, J2, J5 IC951 LENS_SCLK,LEN_EN,LENS_SD...

  • Page 41: System Control Circuit

    SYSTEM CONTROL CIRCUIT STROBE CIRCUIT CHARGING CIRCUIT BOOST5.3V C5401 T5401 D5402 BACKUP3.2V VDD2 TH301 INT_TEMP TEMP SENSOR POWER FILTER AL3.2V OSCILLATION RECTIFIER C5412 VDD3 TRANSFORMER CIRCUIT BLOCK UNREGST VDD1 IC302 BD4289FVM RESET TO DMA BATTERY FLCTL CHG_DONE BACKUP VSS2 ZCHGDONE BATCHGERR TO PWA Q3001...

  • Page 42: Circuit Diagrams

    CIRCUIT DIAGRAMS CP1 BOARD (PWA) POWER P1-16200/SG218-GX VOLTAGE: VIEW MODE, LCD ON 1AV4J11B8060N 1608 L5010 MJC-040-D1-2 D5007 (USE BATTERY) JK501 FBMH1608HL300 RB060M-30 D5004 S_GND RB521S-30 L5001 D5005 F5004 DC JACK FBMH1608HL300 RB060M-30 2A32V POWER_IN UNREGST TO DMB D5006 RB521S-30 F88K2R0D3MFFD 1608 R5210 1K;1/16J...

  • Page 43: Ca1 Board Image Sensor

    CA1 BOARD IMAGE SENSOR TO CP1 (CAA) CN901 CN911 1AV4J11JS440G D_GND EXTCLK VDD_1_8 VDD_1_8 C2-16200/SG218-GX VDD_1_8 VOLTAGE: VIEW MODE, LCD ON VDDPLL VDDPLL VDDIO VDDIO R9101 VDDIO VDDPLL 0;1/16Z D_GND SHUTTER SHUTTER FRAME_VALID FRAME_VALID LINE_VALID LINE_VALID D_GND D_GND D_GND PIXCLK PIXCLK DGND D_GND...

  • Page 44: Cp1 Board (Caa) Level Shifter

    CP1 BOARD (CAA) LEVEL SHIFTER H=0.75 VDD3 2.1X2.0 VDD1.8 IC914 TC7SP3125TU VccB VccA Q9003 DTC144EM PIX_CLK PAON1 PIXCLK LEVEL SHIFTER TO CA1 CN911 CN901 1AV4J10JN440G D_GND C9016 1000P;B VDD_1_8 CMOS1.8V VDD_1_8 VDDPLL C9012 VDDPLL 1000P;B VDDIO VDDIO R9014 0;1/16Z VDDIO CMOS1.8V C9015 D_GND...

  • Page 45: Cp1 Board (Dma) Main

    CP1 BOARD (DMA) MAIN C1308 CD15 LVDD D8 CLKIN R1033 1K;1/16J G2 LVDD CVDD VDD3 C1303 B6 VSS C8 XO B8 XI IC132 TC7WH32FK R1305 DACK QTC7WH32FK--K 6.2K;1/16D A8 BURNIN XDACK DREQ A6 R1 XDREQ IC131 VDD1.8 B3 HVDD S1R72V17B00A20B XWRL XWRL USB_D-...
  • Page 46 CP1 BOARD (DMA) MAIN [UPPER-LEFT] R1033 1K;1/16J VDD1.8 VDD1.0 VDD3 VDD1.8 AD18 AD17 AD16 AD15 AD14 AD13 AD12 AC13 R23 VDD_DDR1 R24 VDD_DDR1 T23 VDD_DDR1 VDD3 T24 VDD_DDR1 G14 VDD_DDR2 G15 VDD_DDR2 C1063 0.1;B C1051 0.1;B C1057 G21 VDD_DDR2 0.1;B C1064 0.1;B G22 VDD_DDR2...
  • Page 47 CP1 BOARD (DMA) MAIN [UPPER-RIGHT] C1308 CD15 LVDD D8 CLKIN R1033 1K;1/16J G2 LVDD CVDD VDD3 C1303 B6 VSS C8 XO IC132 B8 XI TC7WH32FK DACK R1305 QTC7WH32FK--K A8 BURNIN XDACK 6.2K;1/16D DREQ A6 R1 XDREQ IC131 XWRL B3 HVDD S1R72V17B00A20B XWRL QXXAGB015---P...
  • Page 48 CP1 BOARD (DMA) MAIN [LOWER-LEFT] QEV2MB------N BAT+ T18 GND RXDO TO TCA RXDO BAT+ U14 GND HOTLINE BAT+ HOTLINE U15 GND COMREQ BAT+ COMREQ U16 GND 16.0X16.0 ASIC_SDO BAT+ ASIC_SDO U17 GND ASIC_SDI BAT+ ASIC_SDI U18 GND ASIC_SCK BAT+ ASIC_SCK V14 GND MRST MRST...
  • Page 49 CP1 BOARD (DMA) MAIN [LOWER-RIGHT] MB------N DSCKAN DSCKAN DSCKAP DSCKAP ASIC_SDO ASIC_SDI 0X16.0 ASIC_SCK ZSREQ ZSREQ TEST0 AF26 TEST1 AF27 1.39 AVSS12A_PLLS1 AF19 VDD1.8 AVSS12A_PLLS0 AF18 CLOCK GENERATOR C1012 AVSS12A_PLLC AF17 4.7;B 1608 QAK8113L----G AVDD12A_PLLS1 AG19 AK8113L IC111 AVDD12A_PLLS0 AG18 IC103 GEN_OE AVDD12A_PLLC...

  • Page 50: Cp1 Board (Dmb) Audio & Video

    CP1 BOARD (DMB) AUDIO & VIDEO TO CRADLE CONNECTOR CN110 1AV4J11B8420G HP_STBY HP_STBY HP_STBY HP_STBY HDMIINT TO DMA HDMIINT G9 GND LVDSGND USB_D+ USB_D+ J2 TB6 USB_D- USB_D- K2 TC0 VBUS VBUS H2 NC ZAVJACK RCLK- TO SYA RCLK- ZAVJACK J3 VDD DOCK_PON RCLK+...

  • Page 51: Cp1 Board (Tca) Lens

    CP1 BOARD (TCA) LENS F1-16200/SG218-GX TO LENS TO PWA VDD3 VDD3 CN951 VDD3 TO PWA BOOST5.3V 1AV4J11NV231G ZOOM_A+ ZOOM A+ ZOOM_B+ R9709 ZOOM B+ 10;1/16J ZOOM_A- ZOOM A- ZOOM_B- ZOOM B- RB952 PILED ZOOM LED UP03396 Q9501 ZOOM VCC G8 NC MVCC34 Z_SENSE R9505...

  • Page 52: Cp1 Board (Sya) System Control

    CP1 BOARD (SYA) SYSTEM CONTROL Y1-16200/SG218-GX VOLTAGE: VIEW MODE, LCD ON AL3.2V AL3.2V TO DMA SW3.2V BOOST5.3V BOOST5.3V TO PWA UNREGSY UNREGSY ZSREQ TO DMA COMREQ RB307 BAT_T ZAVJACK C3016 TO DMB ZUSB_TRIG BOOST5.3V LCD0/Y0_ZBOOT 300;1/16D IR_ON R3006 TO DMA, DMB Q3004 UNR32AV00 R3019...

  • Page 53: Circuit Waveforms

    ST1 BOARD STROBE TO BATTERY CN543 1AV4J30B3730N BAT+ FLASH REFLECTOR BAT_T S1-16200/SG218-GX BAT- VOLTAGE: STROBE AFTER CHARGE TTRN-0530-026-T CN541 1AV4L17B0560G TO CP1 (DMA) T5401 FV02R80TP CN106 JW541 AWG30 1AV4J11JX400G D5402 BAT+ BROWN BAT+ 2.0X1.25 TPS65560RGTR QTPS65560RGTJ BAT+ IC541 BAT+ STROBE CHARGE JW543 AWG30 BAT+...

  • Page 54: Tb1 Board Hinge Sw

    TB1 BOARD HINGE SW VF1 BOARD LCD CONNECTOR & MIC TO LCD T1-16200/SG218-GX Z1-16200/SG218-GX TO VF1 JW171 CN172 JW651 1AV4J11VQ060G AWG32 LCD AN SI2C LCD AN 2.0X1.25 LCD CA LCD CA TO VF1 JW172 1AV4S10B5621G S6501 JW652 AWG32 ESE18R11BXK BLACK 2.0X1.25 LCD_AN LCD_CA...

  • Page 55: Printed Wiring Boards (P.w.b.)

    PRINTED WIRING BOARDS (P.W.B.) CP1 P.W.B. (SIDE A)

  • Page 56: Cp1 P.w.b. (Side B)

    CP1 P.W.B. (SIDE B)

  • Page 57: Ca1 P.w.b. (Side A & B)

    CA1 P.W.B. (SIDE A) CA1 P.W.B. (SIDE B)

  • Page 58: St1 P.w.b. (Side A & B)

    ST1 P.W.B. (SIDE A) ST1 P.W.B. (SIDE B) TB1 P.W.B. (SIDE A) TB1 P.W.B. (SIDE B) TB2 P.W.B. (SIDE A) TB2 P.W.B. (SIDE B)

  • Page 59: Vf1 P.w.b. (Side A & B)

    VF1 P.W.B. (SIDE A) VF1 P.W.B. (SIDE B) VA171 C1712...
  • Page 60 SANYO Electric Co., Ltd. Osaka, Japan Jul./’08 Printed in Japan...

This manual is also suitable for:

Vpc-hd800gxVpc-hd800gxp

Table of Contents