Machine Information; Network/Factory Reset; Default Settings - Brother HL-1210W User Manual

Troubleshooting and other information

Machine Information

Default settings

The machine has three levels of default settings; the default settings have been set at the factory before
shipment.
Network Reset (HL-1210W and HL-1211W only)

Factory Reset

 Settings Reset
NOTE
• You cannot modify the preset default settings.
• Page counters can never be changed.
Network Reset (HL-1210W and HL-1211W only)
To reset only the print server back to its default settings (by resetting all network information such as the
password and IP address), follow these steps:
a
Turn the machine off.
b
Make sure that the top cover is closed and the power cord is plugged in.
c
While holding down
d
Release . Make sure that all the LEDs turn off.
e
Press six times. Make sure that all the LEDs light up to indicate the machine has been reset to its
network default settings. The machine will restart.
Factory Reset
You can partially reset the machine back to its default printer settings:
a
Turn off the machine.
b
Make sure that the top cover is closed and the power cord is plugged in.
c
While holding down
d
Release . Make sure that all the LEDs turn off.
e
Press eight times. Make sure that all the LEDs light up to indicate the machine has been reset to
its factory default settings. The machine will restart.
, open and close the top cover once.
, open and close the top cover once.
A
A
A
A
A
64