11
Adjusting the right purl seam position
.12
Fig. 11 - 13
11
Adjusting the bartack width
.13
1
Fig. 11 - 14
Adjust the right purl seam position by
turning the milled screw 1.
1
Adjust the bartack width by turning the
milled screw 2.
Close cover 1.
2
Preparation
The right purl seam position
must be adjusted in relation to
the left purl seam position so
that the cutting area between
the two seams is adequately
wide.
The bartack width is set
correctly when the bartack
stitches cover both purl seams.
11 - 10