Samsung SV-613X Service Manual page 115

1-4-28 Assembly of Slide Main
1. Install the shaft of Loading ÒRÓ Gear AssÕy into the left of the Main Slide Hole and secure with the
Slit Washer @. (Refer to detail ÒAÓ)
2. Insert the Tension Control Lever # and the Idler Change Lever $ into the Main Slide Hole.
(Refer to detail ÒBÓ)
3. After confirming the above items 1, 2 install the Main Slide and secure with tabs (a, b, c).
Note : Be sure to assemble the Main Slide when the Loading L/R Gear AssÕy is in unloading position.
Samsung Electronics
WASHER - SLIT
2
"a"
"d"
SLIDE MAIN
4
LEVER IDLER CHANGE
3
LEVER TENSION CONTROL
Fig. 1-48 Assembly of Slide Main
1
GEAR LOADING "R"ASS'Y
GEAR LOADING "L "ASS'Y
"A"
"b"
Disassembly and Reassembly
"B"
"C"
1-47