Specifications - JVC RX-D412B Instructions Manual

Specifications

7 Amplifier
Output Power
At stereo operation:
Front channels:
At surround operation:
Front channels:
Center channel:
Surround channels:
Surround back channels:
Audio
Audio Input Sensitivity/Impedance:
DVR/DVD, VCR, DBS, TV:
Audio Input (DIGITAL IN)*:
Coaxial: DIGITAL IN 1(DVR/DVD):
Optical: DIGITAL IN 2(DBS), 3(VCR):
USB: USB
* Corresponding to Linear PCM, Dolby Digital, and DTS (with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level:
DVR, VCR:
Signal-to-Noise Ratio ('66 IHF/'78 IHF):
Frequency Response (6 Ω):
Bass Boost:
Equalization (at DSP operation):
Center frequency:
Control range:
Video
Video Input Sensitivity/Impedance:
Composite video: DVR/DVD, VCR, DBS:
S-video: DVR/DVD, VCR, DBS:
Y (luminance):
C (chrominance, burst):
Component: DVR/DVD, VCR (DBS):
Y (luminance):
P , P :
B R
Video Output Level/Impedance:
Composite video: DVR, VCR, MONITOR OUT: 1 V(p-p)/75 Ω
S-video: DVR, VCR, MONITOR OUT:
Y (luminance):
C (chrominance, burst):
Component: MONITOR OUT:
Y (luminance):
P , P :
B R
Synchronization:
54
110 W per channel, min. RMS, driven into 6 Ω at 20 Hz to 20 kHz with no more than
0.8% total harmonic distortion.
110 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 0.8% total
harmonic distortion.
110 W, min. RMS, driven into 6 Ω at 1 kHz, with no more than 0.8% total harmonic
distortion.
110 W per channel, min. RMS, driven into 6 Ω at 1 kHz, with no more than 0.8% total
harmonic distortion.
110 W per channel, min. RMS, driven into 6 Ω at 1 kHz, with no more than 0.8% total
harmonic distortion.
300 mV/47 kΩ
0.5 V(p-p)/75 Ω
–21 dBm to –15 dBm (660 nm ±30 nm)
300 mV
80 dB/70 dB
20 Hz to 20 kHz (±1 dB)
+4 dB ±1 dB at 100 Hz
63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz
±8 dB
1 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.286 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.7 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.286 V(p-p)/75 Ω
1 V(p-p)/75 Ω
0.7 V(p-p)/75 Ω
Negative
Designs and specifications are subject to change without
notice.