How To Use Tips Function - Sure Electronics 2004 LCD SMARTIE ASSET User Manual

Overview
FIGURE 1-17 VERSION NUMBER

1.2.5 How to Use Tips Function

1. Firstly, select "Send Memo to MCU" from "Select" under "Command Group" as shown
in Figure 1-18.
FIGURE 1-18 SELECT COMMANDS FOR TIPS EDIT
2. In the interface of "Edit Memo", edit content of tips as shown in Figure 1-19 with
entering maximum 20 letters (including spaces) in each row and 10 rows at most.
FIGURE 1-19 EDIT TIPS
3. Close the configuration page. Right-click the simulator screen and select "Exist" as
shown in Figure 1-20. Tips will be displayed on LCD screen soon afterwards.
FIGURE1-20 TIPS WILL BE DISPLAYED ON LCD SCREEN
© 2004-2011 Sure Electronics Inc.
DE-LP14111_Ver1.1_Page 7