Acer PD726 Service Manual page 20

No Step
7
8
Chapter2
Procedure
1. Choose "Flash
Loader"
2. Click "Browse" to
search the firmware
file. (PD726 / PD730)
3. Select the item "Skip
Boot Loader Area
(load all but the first
64KB)."
4. Click "Reset Bus" to
erase the flash
memory.
(Note: If the error mes-
sage "cannot open USB
driver - No projectors
found" appears, please
unplug the USB Cable
and replug, then check
Driver. Finally, re-do
4. Click "Reset Bus" to
erase the flash memory.)
1. If the firmware is
ready, click "Start
Download" to process
the firmware upgrade.
2. Click "Yes" to erase
the flash memory.
Photo
1
2
3
Note:
2
1
4
14