Table of Contents
Advertisement
Advanced Presetting
Adjusting the Picture Geometry
for an RGB Source
When connecting an RGB source such as a Sony playstation you may need to
readjust the picture geometry.
1
Select the connected RGB source
by pressing ... repeatedly.
2
Press MENU. Select the symbol
using $. Push to ".
3
Select Installation using $. Push to " to enter. Select RGB Set Up using $.
Push to " to enter.
4
Select H Centre by pushing to ". Adjust the centre of the picture
(range from -10 to +10) using 4 or $. Store by pressing OK.
5
Select H Size using $. Push to " to enter. Adjust the horizontal coordinates
(range from -10 to +10) using 4 or $. Store by pressing OK.
6
Press MENU to return to the normal TV screen.
Adjusting the Picture Rotation
Because of the earth magnetism the picture might slant. In this case you can
readjust the picture.
1
Press MENU. Select the symbol
using $. Push to ".
2
Select Installation using $. Push to " to enter. Select Picture Rotation using $.
Push to " to enter.
3
Adjust the Picture Rotation (adjusting range -5 to +5) by pushing to 4 or $.
Store by pressing OK.
4
Press MENU to return to the normal TV picture.
36
Advanced Operation
Advanced Presetting
Inputting Your Personal ID
You can programme your TV with a safety code, so that you can be traced if
your TV is stolen and recovered. This code can only be input once!
RGB Set Up
Make sure to write it down in this Instruction Manual.
H Centre
O
1
Press MENU. Select the symbol
2
Select Installation using $. Push to " to enter. Select Personal ID using $.
H Size
O
Push to " to enter.
3 a
Select the first of a total of 11 characters (letter, number, + or a blank) by
Adjust Position:
Confirm: OK
using 4 or $.
RGB Set Up
b
Push to " to go to the next character.
H Centre
O
c
Repeat a and b for all characters.
4
Store by pressing OK.
H Size
O
5
Press MENU to return to the normal TV screen.
Adjust Size:
Confirm: OK
Presetting and Labelling of Input Sources
1
Press MENU. Select the symbol
2
Select AV Preset using $. Push to " to enter.
3
Select the desired AV input (AV 1, 2 or 3) using 4 or $. Push to " enter.
After each step you have the choice between memorizing (press OK) or going to
Installation
Language/Country
the next item (push to ").
Manual Programme Preset
Further Programme Preset
4
To label the source:
RGB Set Up
Picture Rotation
O
Personal ID
a
Push to " to select Label.
b
Select the first character using 4 or $. Push to " to confirm.
Rotate:
Confirm: OK
c
Repeat step b to select the other 4 characters.
d
Store by pressing OK.
5
Repeat steps 3 to 4 for the other AV inputs.
6
Selecting the AV3 Input Source:
In case of AV3 you have the choice between the front AV3 sockets BCor the
rear Scart 3 L connector.
a
Push to $ to select AV3 Input. Push to " to enter.
b
Select Front or Rear using 4 or $.
c
Store by pressing OK.
7
Press MENU to return to the normal TV screen.
using $. Push to ".
Installation
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Picture Rotation
Personal ID
Select A-Z, 0-9:
using $. Push to ".
AV Preset
AV 3 Input
Select:
AV Preset
AV 3 Input
Select Mode:
- - - - - -
Store: OK
INPUT
LABEL
AV 1
VIDEO
AV 2
VIDEO
AV 3
VIDEO
Rear
Enter:
INPUT
LABEL
AV 1
VIDEO
AV 2
VIDEO
AV 3
VIDEO
Front
Rear
Confirm: OK
37
Advanced Operation
Hide quick links:
Advertisement
Table of Contents
