Checking The Main And Backup Battery Status - Wasp WPA1200 II User Manual

3.2 Checking the Main and Backup Battery Status

This section describes how to view the power level for both the main and
backup battery. To minimize power consumption, you can define settings for
the auto-off function and the processor's operation speed.
To check the main and backup battery status:
1. Open Power Properties.
If the Plug or Battery icon appears
on your device, double-tap the icon
to bring the Power Properties
screen.
Tap Start Settings
→
Power.
The Power screen appears.
2. The battery menu item displays the
status of the main and backup batteries.
On the screen shown here, both
batteries are at almost 100% charge.
NOTE: It is necessary to charge the battery
when the charge is below 10%. If the
battery does not accept a charge,
contact Technical Support.
WPA 1200 II Users' Guide
System
→ →
34