Wasp WPA1200 II User Manual page 17

Charging the Battery using the USB Cable
1. Press and hold the connector button on the USB charging cable and
connect it to the WPA1200 II.
2. Plug the AC adapter cable into the power jack on the USB charging cable.
3. Connect the AC adapter into an electrical outlet.
Charging the Battery with the Docking Station
1. Plug the AC adapter cable into the power jack on the docking station,
then connect the AC adapter into an electrical outlet.
2. Slide the device into the docking station until it
clicks into place.
3. The connection is secure when the bottom
edge of the device is aligned with the docking
station, and the LED indicator on the device
lights up red.
WPA 1200 II Users' Guide
8