Samsung RS21 Service Manual page 23

Ice Maker
1.Pull the shelf out as far as it goes.
2.Lift it up and pull it out from the unit.
Auger Motor & case
1.Remove ice bucket.
2.Remove the screws(4) that secured the case
3.Slide it out from the unit. then, you can
disassemble the auger motor from the
back of the case.
1 2
Cover Multi Freezer Assembly
1. Remove ice bucket and the Ice maker.
2. Remove the covers(①) and sensor covers(②)
3. Remove the screws(3pcs) that secured the
assembly.
4. Disconnect the wire connector(③) and the
connecter for Sensor (it can be possible
to disconnect this connector after removing
the sensor cover)
Cover Evaporator Assembly
1. Remove the assembly of cover multi freezer
2. Pull the assembly out toward front by holding
upper side of the assembly up to see the
connector.
3. Disconnect
the wire
connector
and take the
assembly out.
23
① ③
②