Products Covered By This Manual; Identification Tag Location; Product Identification Tag (Stamped) - Ferris IS2100Z Series Operator's Manual

Thank you for purchasing this quality-built Ferris Commerical
Zero Turn Mower. We're pleased that you've placed your
confidence in the Ferris brand. When operated and maintained
according to the manuals, your Ferris product will provide many
years of dependable service.
The manuals contain safety information to make you aware of
the hazards and risks associated with the unit and how to avoid
them. This Commerical Zero Turn Mower was designed to be
used as described in this operator's manual and operated by
trained professionals for finish cutting of established lawns and
is not intended for any other purpose. It is important that you
read and understand the instructions thoroughly before
attempting to start or operate this equipment. Save these original
instructions for future reference.
This product requires final assembly before use. Refer to the
setup guide for instructions on final assembly procedures. Follow
the instructions completely.

Products Covered by This Manual

The following products are covered by this manual:
5901300, 5901301, 5901302, 5901303, 5901304, 5901307,
5901333
The images in this document are representative, and are meant
to complement the instructional text they accompany. Your unit
may vary from the images displayed. LEFT and RIGHT are as
seen from the operator's position.
Copyright © Briggs & Stratton Corporation, Milwaukee, WI, USA.
All rights reserved.
Ferris is a trademark of Briggs & Stratton Power Products Group,
LLC
Briggs & Stratton Power Products Group, LLC.
5375 N. Main Street
Munnsville, NY 13409-4003
(800) 933-6175
ferrisindustries.com

Identification Tag Location

The Product Identification tag (A, Figure 1) can be found in the
location shown.
1

Product Identification Tag (Stamped)

PRODUCT REFERENCE DATA
Unit Model Number:
Unit Serial Number:
Mower Deck Model Number: (if
applicable)
Mower Deck Serial Number: (if
applicable)
Dealer Name:
Date Purchased:
ENGINE REFERENCE DATA
Engine Make:
Engine Model:
Engine Type/Spec:
Engine Code/Serial Number
When contacting your authorized service dealer for replacement
parts, service, or information you MUST have these numbers.
NOTE: For the location of the engine identification numbers,
refer to engine owner's manual.
The Illustrated Parts List for this machine can be downloaded
from ferrisindustries.com. Please provide model and serial
number when ordering replacement parts.
3