Baumatic BRCF1860-BGL Instruction Manual page 29

o Lift the lower door (3) off the bottom hinge pin and place it on a
cushioned surface to prevent scratching it.
o Remove the bottom décor plinth (1).
o Remove the hinge pin (2) from the bottom right
o Remove the screw hole covers (8) from the middle left of the
appliance and relocate to the opposite side.
o Reverse the direction of the middle hinge (4) by rotating the hinge
180° and transferring the washer on the hinge pin to the opposite
side.
o Install the lower door by locating it onto the bottom left hinge pin
(7).
o While supporting the lower door, reassemble the middle hinge (4)
onto the top left side of the bottom door and then secure the hinge
to the appliance using the two screws. Ensure the lower door is
level and can open/close properly.
o Reverse the direction of the top hinge (6) by rotating the hinge
180° and transferring the washer on the hinge pin to the opposite
side.
o Replace the upper door by locating it onto the left middle hinge pin
(4).
o While supporting the upper door, reassemble the top hinge (6) into
the top left of the top door and then secure the door to the
appliance using the two screws. Ensure the door is level and can
open/close properly.
o Reposition the plinth hinge cover (10) to the opposite side of the
décor plinth. Then re-attach all hinge covers (C) and the bottom
décor plinth to the appliance.
IMPORTANT: Check that both the upper and lower doors open
and shut correctly after you have completed the door reversal
process.
hinge (7) and transfer it along with the washers
to the hinge on the opposite side.
29