Recorders Tab - 3xLogic VIGIL VRM User Manual

7.1.7 Recorders Tab

The Recorders tab is where DVRs are added and configured, and where locations for each DVR are selected. VRM
now supports the ability to add both Sanyo DVRs and VIGIL Servers; simply choose the DVR type in the Recorder
Info window.
Note: It is important to enter location under the Locations tab before entering recorder information so that
these locations will be available to choose from in the Recorder Info window.
Note: An identification sticker should be placed on each DVR with its IP Address for easy reference.
Opens the Recorder Info window. Enter a description and the correct IP address/port for the
recorder in this particular location. For Sanyo DVRs, the IP address is configured for your recorder
during its initial setup. The default port is set to 20000. For VIGIL Servers, use the computer IP
address. The default port is 22801.
Set a location for this DVR. The locations are added in the Locations tab. If a new location is
required, enter it under the Locations tab and then return to edit the Recorders info.
3xLOGIC's VIGIL VRM 7.1 User Guide
Pg. 25