Sanyo PLC-XF60 Service Manual page 36

Optical adjustment
v Integrator adjustment
1
Move the Integrator-out and Integrator-in to remove the shadow
area on the top/bottom or left/roght of the screen.
1) To adjust the image vertically as shown in Fig.4-1, loosen 2
A
screws , and move the slot
2) To adjust the image horizontally as shown in Fig.4-2, loosen 2
C
screws , and move the slot
2
A
Tighten screws and
unit.
A
Fig.4-1
B
by using a slot screwdriver.
D
by using a slot screwdriver.
C
to fix the Integrator-out and Integrator-in
B
A
(Target screen image)
C
C
- 36 -
D
Fig.4-2