Setting Up Mojo - TDK mojo Manuals

SETTING UP MOJO

Inserting the batteries
Insert the (supplied) batteries into the MOJO, following the polarity markings
inside the battery compartment.
Using the headphones
1. Insert the headphones into the headphone jack on the side of your MOJO.
2. Make sure volume control is set low to avoid hearing damage.
3. Press PLAY.
Installing the software
Insert the TDK Navitrack CD-ROM into your computer disc drive and follow
the install instructions.
- or -
If the install program does not start automatically:
1 . Open MY COMPUTER and double-click on the drive that holds the Navitrack disc.
2. Find and double-click "INSTALL TDK NAVITRACK".
3. Follow the prompts to complete installation.
6