High Availability (HA)
Feature Description
5 Setting Up HA
5.1
Set up the First Unit
To build a HA LoadMaster environment there are a number of settings that must be carefully
specified. Follow the steps below to set up HA:
1. Log in to the LoadMaster that is desired to be the active (master) unit.
2. In the main menu, select the System Configuration > Miscellaneous Options > HA
Parameters option.
3. Select HA (First) Mode in the HA Mode drop-down.
4. Click OK on the resulting message.
5. Click OK on the resulting message reminding not to forget to set the Shared IP address.
Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved.
Figure 5-1: HA Mode option
Figure 5-2: HA question
Do not reboot at this time.
Figure 5-3: Shared IP address reminder
Figure 5-4: HA settings
Page 10 / 37