Specifications - Toshiba e-STUDIO 163 Service Handbook

1. SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1.1

Specifications

Values in [ ] are for e- STUDIO203 in case that the specification is different among e-STUDIO163
and e-STUDIO203.
Copy process
Type
Original table
Accepted originals
Copy speed (Copies/min.)
e-STUDIO163
Paper size
A4, B5, LT
A5-R, ST-R
A4-R, B5-R, LT-R
B4, LG, FOLIO, COMPUTER
A3, LD
e-STUDIO203
Paper size
A4, B5, LT
A5-R, ST-R
A4-R, B5-R, LT-R
B4, LG, FOLIO, COMPUTER
A3, LD
* "–" means "Not acceptable".
* The copy speed in the above table are available when originals are manually placed for single side,
multiple copying.
* When the ADF is used, the copy speed of 16[20] sheets per minute is only available under the fol-
lowing conditions:
• Original/Mode:
• Number of sheets:
• Reproduction ratio:
December 2005 © TOSHIBA TEC
Indirect electrophotographic process (dry)
Desktop type
Fixed type (the left rear corner used as guide to place originals)
Sheet, book and 3-dimensional object. The automatic document feeder
(ADF) only accepts paper which are not pasted or stapled. (Single-sided orig-
2
inals: 50 to 127 g/m /13 to 34 lb. Bond) Carbon paper are not acceptable
either.
Maximum size: A3/LD
Drawer
Size specified
16
-
15.5
13
11
Drawer
Size specified
20
-
15.5
13
11
Single side original/A4/LT size. APS/automatic density are not selected.
16[20] or more.
100%
e-STUDIO163/203 SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1 - 1
Bypass feed
Size not specified
16 11
16 11
15.5 11
13 11
11 11
Bypass feed
Size not specified
20 11
20 11
15.5 11
13 11
11 11
1
PFU
16
-
15.5
13
11
PFU
20
-
15.5
13
11