EmPTYing THE DUST COnTainEr
1
To remove the dust container from the
cleaner press the bin release button.
Hold the container over
2
the bin and press the bin
open button .
The dust container door
4 3
will open and you can
empty with no contact
with the dust.
Once emptied, gently tap
4 4
or shake the container to
release any excess dust
from the filters.
CLEaning THE PrE mOTOr FiLTErS
Rotate the upper part of the
1
dust bin to open.
Gently tap both filters to release any
4
excess dust.
!
imPOrTanT! Ensure the mesh sleeve is
reassembled to the HEPA filter before use
CLEaning THE EXHaUST FiLTEr
The exhaust filter should be washed every month.
Press down on the latch to remove the exhaust cover.
Remove filter and wash with warm water.
Remove excess water by shaking and leave to dry for
24 hours. Refit filters only when completely dry.
- 6 -
Remove the filter assembly
3
2
from the upper part.
Wash both filters under hand warm water until the
5
water runs clean. Remove excess water by shaking
and leave to dry for 24 hours.
When completely dry reassemble and refit filters to
cleaner.
Remove the mesh filter from
the filter assembly.