Sony TRINITRON KV-27FV300 Service Manual page 132

Operating Instructions
Use the joystick to scroll up or down to select from one of the following
MTS
Multi-Channel
options, then press
TV Sound
Stereo:
Auto SAP: Select to have the TV automatically switch to a Second Audio
Mono:


Press button on the remote control for direct access to the MTS settings (Stereo, Auto SAP,
Mono).
Speaker Use the joystick to scroll up or down to select from one of the following
Custom options, then press
selection of
On:
audio output
source Off:
Audio Out Use the joystick to scroll up or down to select from one of the following
Use to control options, then press
the TV's volume Audio Out settings can only be set when speakers are set to Off.
through a stereo Variable:
Fixed:


Audio Out settings can only be set when Speaker is set to Off.


If your TV is set to Auto SAP, some programs may be muted or distorted. If your TV does not output
sound, change your Audio MTS setting to Stereo or Mono.
36
to select it.
Select when viewing a broadcast in stereo.
Program (SAP) when a signal is received.
Select to reduce noise in areas of poor reception.
to select it.
Select to listen to the sound from the TV speakers with or
without a separate stereo system.
Select to turn off the TV speakers and listen to the TV's sound
only through external audio system speakers.
to select it.
Adjust the volume through your TV.
Adjust the TV volume through a connected stereo.