Outside Panel - Sony TRINITRON KV-27FV300 Service Manual

Model RM-Y182
For KV-32FV300, KV-36FV300 models

Outside Panel

1
2
3
4
5
6
7
8
9
0
qa
qs
Button Description
Press to turn off the sound. Press again or press
1 MUTING
restore the sound.
2 SYSTEM OFF Press to power off the equipment programmed into the
qd
remote control, see "Programming the Remote Control"
on page 49.
qf
3 SLEEP Press repeatedly until the TV displays the time in minutes
(15, 30, 45, 60, or 90) that you want the TV to remain on
qg
before shutting off automatically. Cancel by pressing until
qh
Sleep Off appears. While Sleep feature is set, press once to
view remaining time.
qj
4 DISPLAY Press once to display the current time and program status
(such as channel number, channel label (if set), video
input, and video label). Press again to turn display off.
5 JUMP Press to jump back and forth between two channels. The
qk
TV alternates between the current channel and the last
channel that was selected.
ql
6 Press to turn the headphones on and off.
w;
7 PICTURE Press repeatedly to step through the available video
MODE picture modes: Vivid, Standard, Movie and Sports. Also
available in the Video menu. See "Using the Video Menu"
wa
on page 34 for details.
8 Press to switch between the TV and SAT (satellite) inputs
TV/SAT
ws
when in SAT FUNCTION mode.
Press for a direct selection of Effect settings (Simulated,
wd
WOW, TruSurround, Off), when the remote is in TV
FUNCTION mode. See "Using the Audio Menu" on page
35 for details.
9
MENU Press to display the on-screen menu. Press again to exit
the menu at any time.
q; VOL (volume) Press (+) or (-) to adjust the volume.
qa Use the joystick to move the on-screen cursor. Press down
on the center of the joystick to select the item.
qs CODE SET Use to program your remote control to operate connected
video equipment. See "Programming the Remote
Control" on page 49.
Introduction
to
5