Options - Toshiba e-studio5540c Quick Start Manual

Chapter 5 INFORMATION ABOUT EQUIPMENT

Options

The following options are sold separately, and upgrade the performance of the equipment if installed. For details,
contact your service technician or representative.
1.
Saddle Stitch Finisher (MJ-1104)
This Finisher enables saddle stitching, in addition to sort/
group finishing and stapling. The Hole Punch Unit
(optional, MJ-6102) can be installed in this Finisher.
2.
Finisher (MJ-1103)
This Finisher enables sort/group finishing and stapling.
The Hole Punch Unit (optional, MJ-6102) can be installed
in this Finisher.
60
1 3
2
3.
Hole Punch Unit (MJ-6102)
This unit enables you to punch holes on printed sheets.
4.
External Large Capacity Feeder (MP-2501)
This feeder enables you to feed up to 2500 sheets (80 g/
m or 20 lb. Bond) of A4 or LT paper.
2
4