Using The Stabilizer Plate - Janome Memory craft 9900 Instruction Manual

Janome MC9900 Instruction Manual
z
q
x
c
www.aaasewing.com

Using the Stabilizer Plate

The stabilizer plate holds and supports the fabric so it is
helpful when sewing buttonholes over the hem of thick
fabrics.
z Insert the tab of the stabilizer plate q into the slot w
of the buttonhole foot.
w
q Stabilizer plate
w Slot
x Place the button on the button holder of the foot.
Attach the buttonhole foot to the machine.
Insert the fabric between buttonhole foot and stabilizer
plate. Draw the needle thread to the left between the
foot and stabilizer plate.
c Place the fabric between the buttonhole foot and
stabilizer plate. Lower the needle into the starting
point by turning the hand wheel.
Lower the foot and buttonhole lever.
Start the machine while pulling the needle thread
lightly to the left. After sewing a few stitches, free the
thread and continue sewing.
NOTE:
The sewing procedure is exactly the same as that for B1
sensor (square) buttonholes.
40
Janome Embroidery Machine
MC9900 Owners Manual/ User Guide