Winding The Bobbin - Janome Memory craft 9900 Instruction Manual

Janome MC9900 Instruction Manual
z
x
e
w
w
v
b
u
n
m
,
www.aaasewing.com
q
c
r
e
q
y
i

Winding the bobbin

z Pull the thread from the spool.
Hold the thread with both hands and pass the thread
into the guide slot q.
q Guide slot
x Draw the thread to the left and forward around the
thread guide w.
Draw the thread to the rear and to the right around
and under the guide plate e.
Firmly pull the thread to the right while holding it with
both hands.
w Thread guide
e Guide plate
c Put the bobbin on the bobbin winder spindle.
t
r Bobbin
t Bobbin winder spindle
v Pass the thread to the bobbin.
Hold the thread with both hands and wind it around
the bobbin clockwise several times.
b Insert the thread into one of the slits u of the ange
plate y and pull the thread to cut.
y Flange plate
u Slit
n Push the bobbin to the right. The visual touch screen
will show the bobbin winding sign.
m Start the machine. When the bobbin is fully wound, it
will stop spinning automatically.
Stop the machine and return the bobbin winder to its
original position by moving the spindle to the left.
, Remove the bobbin. Cut the thread with bobbin thread
cutter B.
i Bobbin thread cutter B
11
Janome Embroidery Machine
MC9900 Owners Manual/ User Guide