Advertisement
6 Installation instructions
GB
6 Installation instructions
All electrical work shall be undertaken
by a competent person and shall
comply with BS 7671 (IEE Regulations).
· Turn off the boiler.
· Isolate the electrical supply to
the boiler
10
· Release the time clock blanking plate
from the control box.
· Locate the five pins on the rear of the
programmer and gently push the
programmer until it locks into position.
· Recommission the boiler.
Hide quick links:
Advertisement
Need help?
Do you have a question about the time SWITCH 130 and is the answer not in the manual?