Sanyo PLC-XP18N Service Manual page 43

Po!ar!zed G!ass Adjustment
[Before Adiu*<ment]
- tnput a 100% ot Mack raster signa).
R/G/B Polarized gtass adjttstment
1. Loosen a screw " A " (Fig. 12) on the po)arized glass mounting base which
you intend to adjust.
2.1\tm the polarized glass mounting base as shown in Fig. 14, adjust the low-
est level in black.
3. Tighten the screw " A " to fix the polarized glass mounting base.
Potarizadgtasa
mounting baao
^. Polarized
; g!ass
-43-