EQUIPMENT INCLUDED
LDWO SERIES — Hot Water Models
Pre-assembled heat exchanger with built-in air separator.
Insulated baked enameled jacket.
Flue collector.
Draft regulator.
Flame retention oil burner with nozzle and CAD cell.
Primary burner control.
Temperature limit.
Flue brush.
Module temperature and pressure gauge.
System pressure and temperature gauge (unmounted-1 per system)
Pressure relief valve (unmounted-1 per module)
Control header (unmounted-1 per system, up to 8 modules)
Figure 6:
Oil Caravan—optional header assembly for all models LDWO and LWDF hot water Caravan systems.
OPTIONAL EQUIPMENT
Headers.
Control system.
*Building piping must be rigidly secured so it cannot
move where connected to headers.
NOTE:
Shown reverse return (Preferred). For direct return,
header assembly piping connections may be made at
the same end of the boiler bank, not as shown.
Some governing agencies do not allow compression
type couplings. Consult your local code requirements.
4