Minimum Requirements For A Wfs709Tp Deployment - NETGEAR WFS709TP Quick Start Manual

Minimum requirements for a WFS709TP Deployment

At the very least, in a hardware level, to deploy the WFS709TP controller you will need one or more
compatible access points, WGL102 and WAGL102. (Note that WG102 and WAG102 APs can be
upgraded with a Lightweight image to work with the WFS709TP, refer to the Appendix at the end of this
document for more information). If you want to offer internet connection to your hosts, it is assumed
another device will be connected to the controller to offer web connectivity.
The access points can be connected through other devices in a local network (Figure B). The access
points need to be able to communicate to the Wireless Controller at an IP level so any VLAN or sub-net
implementation requires careful consideration.
The scope of this document will be to explain the initial installation of the WFS709TP in a network that is
not using any VLAN scheme.