Table of Contents
Advertisement
Posi-
Specification
tion
Automatic dipped beam. Main
beam and main beam flash
work in this position
vated dipped beam.
Position/parking lamps
Dipped beam. Main beam and
main beam flash work in this
position.
A
Applies to certain markets.
Main beam flash
Move the stalk switch gently towards the steer-
ing wheel to the position for main beam flash.
Main beam comes on until the stalk switch is
released.
Dipped beam
When the engine is started, dipped beam is
3
activated automatically
if the headlamp con-
trol is in position
. If necessary, auto-
matic dipped beam for this position can be
deactivated by a workshop. Volvo recom-
mends that you contact an authorised Volvo
workshop.
3
Applies to certain markets.
In position
vated automatically when the engine is running
or when the remote control key is in position
II.
A
Main beam
/Deacti-
Main beam can be activated when the head-
lamp control is in position
Activate/deactivate main beam by moving the
stalk switch towards the steering wheel to the
end position and release.
When main beam has been activated the sym-
bol
illuminates in the combined instru-
ment panel.
03 Your driving environment
dipped beam is always acti-
3
or
.
*
Option/accessory, for more information, see Introduction.
Active Xenon headlamps - ABL*
Headlamp pattern with function deactivated (left)
and activated (right) respectively.
If the car is equipped with active Xenon head-
lamps (Active Bending Lights - ABL) the light
from the headlamps follows the steering wheel
movement in order to provide maximum light-
ing in bends and junctions and so provide
increased safety.
The function is activated automatically when
the car is started. In the event of a fault in the
function the
symbol illuminates in the
combined instrument panel at the same time
as the information display shows an explana-
tory text and a further illuminated symbol.
Lighting
03
``
87
Advertisement
Table of Contents
