Volvo 2012 S80 Owner's Manual page 238

05 Infotainment system
Radio
NOTE
Only one of the functions "
text Show presets
" and "
vated at a time. If one of them is activated
when the other is already activated, then the
previously activated function is deactivated
automatically. Both functions can be deac-
tivated.
Advanced settings
DAB to DAB link
It is possible to exit a channel with poor or no
reception to the same channel in another chan-
nel group with better reception. There may be
a certain delay when changing channel group.
05
There may be a period of silence between the
current channel no longer being available to the
new channel becoming available.
The function can be activated/deactivated in
DAB mode under DAB menu
settings DAB linking.
Wavelength
DAB can be transmitted on two
•
Band III
- covers areas outside big cities
•
LBand - mainly in large cities
By selecting for example
channel programming takes place more
5 Not all areas/countries use both wavelengths.
236
quickly than if both
been selected. It is not certain that all channel
Show radio
groups will be found. Wavelength selection
" can be acti-
does not affect the stored memories.
Wavelengths can be deactivated/activated in
DAB mode under
settings
Subchannel
Secondary components are usually named
subchannels. These are temporary and can
contain e.g. translations of the main pro-
gramme into other languages.
If one or more subchannels are broadcast then
the > symbol is shown to the left of the channel
name in the TV screen. A subchannel is indi-
cated by the
the channel name in the TV screen.
Subchannels can only be accessed on the
selected main channel and not on any other
Advanced
channel without selecting it.
Display of subchannels can be deactivated/
activated in DAB mode under
5
wavelengths:
Advanced settings
Programme type text
Some radio stations broadcast information
Band III
on its own,
about programme type and programme cate-
Band III and LBand have
DAB menu Advanced
DAB band.
- symbol appearing to the left of
DAB menu
Sub channels
gory. This information is shown on the TV
screen.
The function is activated/deactivated in DAB
mode under DAB menu Advanced
settings Show PTY text.
Resetting the DAB settings
All DAB settings can be reset to the original
factory settings.
–
The reset is carried out in DAB mode under
DAB menu Advanced settings
Reset all DAB settings.