Table of Contents
Advertisement
NOTE
•
The list only shows the frequencies of
stations that are currently being
received, not a complete list of all radio
frequencies on the selected wave-
length.
•
If the signal from the currently received
station is weak, this may prevent the
radio from updating the station list. If
this occurs, press the
(while the station list is shown in the dis-
play screen) in order to change to man-
ual tuning and set a frequency. If the
station list is no longer shown, turn
TUNE one step in either direction to
show the list again, and press
switch.
The list disappears from the TV screen after a
few seconds.
If the station list is no longer shown, turn
TUNE one step in either direction and press the
button in the centre console to change
to manual tuning (or to return from manual tun-
ing to the function for "Station list").
Manual tuning
The preset from the factory is that the radio
shows the station list of the strongest stations
in the area when you turn TUNE (see the sec-
tion "Station list", page 230). When the station
list is shown, press the
tre console to change to manual tuning. This
allows you to select a frequency from the list of
all available radio frequencies in the selected
wavelength. In other words, if turn TUNE one
step in a manual search the frequency is
changed from e.g. 93.3 to 93.4 MHz, etc.
To manually select a station:
button
1. Repeatedly press on the RADIO button
until the desired wavelength (
etc.) is shown, release and wait a second
or press OK/MENU.
2. Turn TUNE to select a frequency.
to
05 Infotainment system
NOTE
The preset from the factory is that the radio
button in the cen-
automatically searches for the stations in
the area where you are driving (see previous
section "Station list" above).
But if you have changed over to manual tun-
ing (by pressing the
tre console when the station list was
shown), then the radio remains set in the
function for manual tuning the next time you
switch on the radio. To change back to the
function for "Station list", turn TUNE one
AM
FM1
step (to show the complete list of stations)
,
and press the button
Note that if you press
tion list is not shown then INFO is activated.
For more information on this function, see
page 227.
Preset
10 presets can be stored per wavelength
AM
FM1
(
,
The stored presets are selected using the pre-
set buttons.
1. Tune into a station (see "Tuning", page
230).
2. Hold in one of the preset buttons for a few
seconds, the sound disappears during this
Radio
button in the cen-
.
when the sta-
etc.).
05
231
Advertisement
Table of Contents
