Table of Contents
Advertisement
OPERATING INSTRUCTIONS (continued)
SETUP MENU
Picture
Audio
Timer
MENU
Function
Setup
Language
Select
OK Set
Selected characters
System
Color System
AV1
AV2
AV3
AV4
Video Input
AV1
AV2 (1st step)
AV2 (2nd step)
AV4
OK
System1
System2
Auto
NTSC-M
PAL-N
PAL-M
Auto
HDTV
SDTV/DVD
RGB
Composite/Component
Auto
HDTV
SDTV/DVD
S.Video
Composite
Setup
System
System 2
Color System
Video Input
Audio Input
Scart Output
Monitor
RGB1
DVI-STB
RGB2
Component
HDTV
Select
OK
Set
Return
Setup
System
System 2
Color System
Video Input
Audio Input
Scart Output
Monitor
RGB1
DVI-STB
RGB2
Component
HDTV
Select
Set
Return
OK
Setup
System
System 2
Color System
Video Input
Audio Input
Scart Output
Monitor
RGB1
DVI-STB
RGB2
Component
HDTV
Select
OK
Set
Return
Do not change the original setting.
(System1 : Europe/Asia, System2 : North America)
This should correspond to the color system of the signal from the
equipment that is connected to the AV1 video input terminal.
• Normally, set this to Auto. The system of the input signal will be
automatically recognized.
• If the input signal contains a lot of noise or has a low level at Auto and
the operation is erratic, set this to match the input signal.
• When the component signal is received, this setting is not available
(grayed out).
(Same to AV1)
This should correspond to the signal mode of the signal from the
equipment that is connected to AV1 video input terminal.
• Normally, set this to Auto. The signal mode of the input signal will be
automatically recognized.
• If the input signal contains a lot of noise or has a low level at Auto and
operation is erratic, set this to match the input signal.
This should correspond to the signal mode of the signal from the
equipment that is connected to AV2 video input terminal.
This step should be set only when [Composite/Component] is selected on
the 1st step. The procedure is same as for AV1.
• If the signal from the equipment that is connected to the AV4 Scart input
terminal is S.Video or Composite, set this to correspond to that signal.
• If the signal is RGB, it will be automatically recognized and this setting
will have no effect.
Setup
Color System
OK
AV1
Auto
AV2
NTSC-M
AV3
PAL-M
AV4
PAL-N
Select
Return
Exit
Setup
Video Input
OK
AV1
Auto
AV2
Composite/Component
AV3
Auto
AV4
S.Video
Select
Return
Exit
Setup
Audio Input
OK
AV1
Stereo
AV2
L/Mono
AV3
Stereo
AV4
L/Mono
Select
Return
Exit
Setup hint
Advertisement
Table of Contents
